rubber diaphragm seal

1.​‍​‌‍​‍‌​‍​‌‍​‍‌ The design of fabric-reinforced, high-tensile-strength diaphragm is meant for tear and fatigue resistance, making the diaphragm capable of handling very high-pressure, high-frequency operating conditions. 2. Since EPDM and silicone release very low amount of leachables and have no smell, they can be used for clean piping systems and medical equipments. 3. The valve rubber diaphragm that is very accurate can be made in very thin thickness at 0.5 mm, with exact shape to the valve ​‍​‌‍​‍‌​‍​‌‍​‍‌cavity.

1.​‍​‌‍​‍‌​‍​‌‍​‍‌ We provide a large assortment of ready-made sealing accessory sets as well as entire repair kits for units, thus leaving behind the compatibility problems caused by piecemeal sourcing. 2. We have materials like NBR, EPDM, FKM, and PTFE that cater to different kinds of media and work conditions. 3. In relation to the type of material, our rubber diaphragm seals are capable of handling very low and very high temperatures - from -50°C up to 200°C. They also have a compression set as low as 10% which means they will keep sealing strongly for a long time and will not loosen or show signs of aging ​‍​‌‍​‍‌​‍​‌‍​‍‌early.

1.​‍​‌‍​‍‌​‍​‌‍​‍‌ The high pressure rubber membrane after being integrally molded becomes a compact and non-porous material with a protective layer capable of puncturing and breaking resistance even when the machine is continuously operated by reciprocating motion. 2. We can handle environments from -20°C up to 150°C. By choosing from a number of rubber options, it is possible to find a material that perfectly matches your needs with respect to the chemical nature of the working media, whether it is acidic, alkaline, oily, or particulate in character. 3. This vacuum pump rubber diaphragm is precisely made with measurements that could deviate only by ±0.5mm. Its capability to withstand a pressure of 0.2-0.8MPa also makes it the right choice for domestic as well as industrial ​‍​‌‍​‍‌​‍​‌‍​‍‌uses.

Molded​‍​‌‍​‍‌​‍​‌‍​‍‌ rubber diaphragms are manufactured through a high-temperature, one-step molding procedure, which creates a compact and homogeneous material without any seams. Being the major elastic, pressure-bearing parts of diaphragm pumps, pneumatic valves, and metering pumps, they come with high tearing strength, very good resistance to the continuous flexing, highly dependable sealing performance, and remarkable ​‍​‌‍​‍‌​‍​‌‍​‍‌longevity.